SATRA S-A2110A is universal device for locking the clutch disk. This tool makes a quick job of single handy aligning the clutch and pressure plate before fitting. Allows for manual fixing (centring) and applying the clutch disc to the pressure plate in cars and trucks during installation.
GREAT QUALITY FOR THE BEST PRICE!
Set includes:
– two sleeve anchors for different diameters of the bearings in the crankshaft
– one strut sleeve with a very large scope of regulation to the shaft without shaft support bearing clutch
Instructions:
Thread the funnel wheel onto the central body, with ribs facing the same direction as those on the fixed wheel that is the smooth side of the wheel facing away from the fixed wheel. Select suitable collet, depending on clutch size, and slide onto central shaft. Insert central shaft and collet through central body, and thread small wheel onto the end of the shaft.
Step 1. Place clutch plate over pressure on workbench, insert tool through the center and push down.
Step 2. Tighten the small wheel to expand the collet which is inside the clutch plate.
Step 3. Tighten the funnel wheel until contact is made with the pressure plate then turn both plates over.
Step 4. Align both plates together by slipping them sideways until both edges are parallel, then tighten the funnel shaft, holding both plates together.
Step 5. Install the both plates to the flywheel, then remove the tool by loosening the small wheel.
We often send out our newsletter with news and great offers. We will never disclose your data to third parties and you can unsubscribe from the newsletter at any time.
Unfortunately, we’re unable to offer free samples. As a retailer, we buy all magazines from their publishers at the regular trade price. However, you could contact the magazine’s publisher directly to ask if they can send you a free copy.
You can create a new account at the end of the order process or on the following page. You can view all of your orders and subscriptions in your customer account. You can also change your addresses and your password.
No, you don’t have to create an account. But there are a few advantages if you create an account.
You never have to enter your billing and shipping address again
Find all of your orders, subscriptions and addresses in your account
Download invoices of your orders
No, we don’t have a physical store location at the moment. We accept only orders through our online shop and we’re shipping all orders with the Swiss Post Service. Please visit our shipping section for more details.
From time to time you will find us at design fairs and popup markets in Switzerland. Subscribe to our newsletter and you’ll receive the latest news.
